Board logo

標題: [記憶體] 加RAM的問題 [打印本頁]

作者: ckbetty8889    時間: 2010-4-9 01:26 AM     標題: 加RAM的問題

現在用 1GB RAM PC2 4200U-444-12
問人即係 DDR 2 533
但出去買都冇得買, 咁應該買咩啱用.
部機係邊度可以睇到支唔支援到.
作者: hi777sun    時間: 2010-4-9 11:32 AM

ddr2  800    2g ram  ( ok  )但祇可以兩者選其一
作者: hi777sun    時間: 2010-4-9 11:34 AM

即是不可用回你的   1 g   ddr2   533
作者: ckbetty8889    時間: 2010-4-9 12:10 PM

咁可唔可以買多條 1 GB RAM 一齊用.
作者: kingjulian    時間: 2010-4-12 06:14 PM

Usually, the motherboard comes with four DDR2  DIMM sockets.  You mentioned that you had 1GB RAM PC2 4200U-444-12 (DDR 2 533 ).  You must ensure that there is one 1GB module or there are two modules of each 512KB.  If you have one 1GB module, get another 1GB module.  If you have two modules, get two others of the same kind.
DDR2  DIMM sockets always come in pair.  There are two channels (two DDR2 DIMM sockets for one channel).  You can easily see that the four DDR2 DIMM sockets are in two different colours.  Make sure that you insert the same kind of RAMs into the sockets of the same colour.  It is a good idea to have the same make and sizes of RAMs always.
作者: ckbetty8889    時間: 2010-4-16 10:07 AM

thanks




歡迎光臨 公仔箱論壇 (http://5.39.217.76/) Powered by Discuz! 7.0.0