1 try to use other window cd
2 check the ddr ram
3 check the mainboard作者: kayon1212 時間: 2009-6-17 03:42 PM
SATA 需要在安装时按F6来安装一个程式的。
IDE 就不需要。
建议你在BIOS 改 setting ， 如果没得改就做一个SATA XP作者: anthony0908 時間: 2009-6-20 09:29 PM
Again many reason case blue scree like hardware error or fault need to see yoyr code to solve it作者: initiald831 時間: 2009-6-28 12:33 PM
if windows can't find any possible hard drive to install windows, it will tell you to press F3 to restart your machine.
if so, you probably need to install driver for your controller (IDE, SATA, SCSI or eles)
you will need to press F6 after you first started the windows install, however the setup on able to detect Floppy.........(it could be external USB floppy) , so at this point you will have to obtain the driver and place it into the floppy disk (driver can be downloaded from you motherboard manufacture) .
If you don't have a floppy drive, you will need to embedded your controller driver to your windows xp installation cd.
