Board logo

標題: [問題] CANON ERROR 99 問題 [打印本頁]

作者: dovelfw    時間: 2013-6-26 10:27 PM     標題: CANON ERROR 99 問題

小弟有支24-105, 安裝去了相機後影幾張有過這個ERROR 99. 其他鏡就無咁既問題. 唉~~~~
作者: dovelfw    時間: 2013-6-26 11:35 PM

係咪Canon的單鏡經常有這個問題發生?
作者: tub8888    時間: 2013-6-27 09:12 AM

CANON ERROR 99包含的範圍很多,包括快門故障、鏡頭接觸不良....等,如果只有這顆鏡頭會發生錯誤,那接觸不良的機會很高,小心地用橡皮擦摩擦鏡頭的黃金接點(小心不要讓橡皮擦屑掉入鏡頭),如果沒有把握最好不要嘗試,相機及鏡頭一齊送修吧。
作者: markhamwong    時間: 2013-6-27 09:34 AM

Firmware 1.0.3 fixes Canon Error 99
1. Corrects a phenomenon in which an image becomes overexposed when C.Fn.II-3 Highlight tone priority is set to '1³ together with other camera settings. (This correction has already been incorporated in the Version 1.0.2 and later firmware.
2. Corrects a rare phenomenon in which 'busy blinks on the camera's display panel and the shutter cannot be released due to the timing of battery installation.
3. Corrects a rare phenomenon in which 'Err 99³ appears on the camera's display panel and LCD monitor and the shutter cannot be released due to the timing of pressing the shutter button.
作者: dovelfw    時間: 2013-6-27 09:41 PM

Firmware 可以點UPDATE呢? 我希望試完會無事啦
作者: dovelfw    時間: 2013-6-27 10:23 PM

原來update firmware係咁容易. download了個Firmware後放入去張cf card.
再放入相機. 係menu裡按update就係咁簡單.
現在update完了. 但好不幸. error 99問題依舊.

根據tub8888兄的方法. 用擦膠擦下個接觸金屬接點. 都係唔得!!! 唉




歡迎光臨 公仔箱論壇 (http://5.39.217.76/) Powered by Discuz! 7.0.0